latinica | ћирилица | english
Poslednja izmena: 06/03/2020
   


Prijava i registracija



Registrujte se da bi ste imali mogućnost pristupa elektronskim izdanjima SMEITS-a


Program SMEITS-a

Skupština SMEITS-a

3. marta 2020. godine držana je 32. Skupština SMEITS-a. Usvojeni su izveštaj o radu  SMEITS-a za 2019. i plan rada za 2020. godinu. 

Medalja "Branislav Đaković" dodeljena je
prof. dr Milovanu Živkoviću, dipl. maš. inž.


 

Processing ’20 is the thirty-third international congress on process industry organised by the Society for Process Engineering within SMEITS (Serbian Union of Mechanical and Electrical Engineers and Technicians), in cooperation with the Department of Process Engineering of the Faculty of Mechanical Engineering of Belgrade.

Processing’20 will be held in Vrdnik on 4th and 5th June 2020.

The programme of Processing ’20 will focus on the use of renewable energy sources and reduction of negative environmental impacts caused by plants in various fields of process industry.

The special topic of Processing ’20 is the application of the circular economy concept for the purpose of meeting the targets of sustainable development in reduction of harmful emissions, introduction of renewable energy sources, and production and trade of sustainable products, i.e. the closing of the product-waste-product circle in different fields of process industry. 

Organizers

 

 

undefined

Socitety for Process Engineering, 
within the SMEITS
 Department for Process Engineering
Mechanical Faculty, Belgrade University

 Program endorsement

 

 

Faculty of Technology and Metallurgy, University of Belgrade, Belgrade

undefined  

Faculty of Technical Sciences,
University of Novi Sad,
Novi Sad, Serbia

 

undefined  

Department for Energy and Process Engineering, aculty of Technical Sciences
University of Novi Sad,
Novi Sad, Serbia

 
 

undefined  

Faculty of Technology
University of Novi Sad,
Novi Sad, Serbia

 

undefined  

Faculty of Organizational Sciences, University of Belgrade,
Belgrade, Serbia

 
 undefined 

Mechanical Faculty
University of Niš, Serbia

 

Sponsors

   undefined           

 
 gasteh          
 

International Scientific Committee 

  • Prof. Dušan Golubović, Ph.D., University of East Sarajevo, Bosnia and Herzegovina
  • Prof. Damir Đaković, Ph.D., Faculty of Technical Science, Novi Sad, Serbia
  • Prof. Vladan Karamarković, Ph.D., Faculty of Mechanical and Civil Engineering, Kraljevo, Serbia
  • Prof. Jelena Janevski, Ph.D., Faculty of Mechanical Engineering, Niš, Serbia
  • Prof. Vladan Ivanović, Ph.D., Faculty of Mechanical Engineering, Podgorica, Montenegro
  • Prof. Olivera Stamenković, Ph.D., Faculty of Technology, Leskovac, Serbia
  • Prof. Ivona Radović, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Prof. Mirjana Kijevčanin, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Prof. Srbislav Genić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Prof. Aleksandar Jovović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Prof. Dejan Radić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Prof. Aleksandar Petrović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Prof. Vojislav Novaković, Ph.D., Norvegian University of Science and Technology, Norway
  • Prof. Mirko Dobrnjac, Ph.D., Faculty of Mechanical Engineering, Banja Luka, Bosnia and Herzegovina
  • Prof. Dorin Lelea, Ph.D., University Politehnica, Timisoara, Romania
  • Prof. Francisc Popescu, University Politehnica, Timisoara, Romania
  • Olga Petrov, Ph.D., British Columbia Institute of Technology, Kanada
  • Mladen Đurić, Ph.D., Faculty of Organisational Sciences, Belgrade
  • Maja Đolić, Ph.D., Institute for Nuclear Sciences Vinča, University of Belgrade
  • Prof. Branislava Nikolovski, Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
  • Prof. Ljiljana Medić-Pejić, Ph.D., Universidad Politecnica de Madrid, Spain
  • Prof. Filip Kokalj, Ph.D., Univerza v Mariboru, Maribor, Slovenia
  • Prof. Zoran Stević, Ph.D., School of Electrical Engineering, Belgrade
  • Stefan Mandić-Rajčević, Ph.D., University of Milan, Italy

Organising Committee 

  • Miroslav Stanojević, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Biljana Miljković, Ph.D., Faculty of Technical Sciences, Novi Sad, Serbia
  • Stojan Simić, Ph.D., University of East Sarajevo, Bosnia and Herzegovina
  • Dunja Sokolović, Ph.D., Faculty of Technical Sciences, Novi Sad, Serbia
  • Miljan Marašević, Ph.D., Faculty of Mechanical and Civil Engineering, Kraljevo, Serbia
  • Goran Vučković, Ph.D., Faculty of Mechanical Engineering, Niš, Serbia
  • Mladen Josijević, Faculty of Engineering Sciences, Kragujevac, Serbia
  • Boris Hrnčić, Ph.D., Faculty of Mechanical Engineering, Podgorica, Montenegro
  • Marija Tasić, Ph.D., Faculty of Technology, Leskovac, Serbia
  • Ljubiša Vladić, PUC "Beogradske elektrane", Belgrade
  • Milica Karanac, Ph.D, Envico, Belgrade
  • Marta Trninić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Marko Obradović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Dušan Todorović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Divna Majstorović, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Nikola Karličić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Nikola Živković, Ph.D., Laboratory for Thermal Engineering and Energy, "Vinča" Institute for Nuclear Sciences, University of Belgrade Belgrade
  • Jelena Salević, SMEITS, Belgrade
  • Vladan Galebović, SMEITS, Belgrade

Thematic fields

1. Process technologies. Petroleum, chemical and petrochemical industry; ferrous and non-ferrous metallurgy; non-metal mineral processing; industry of plastic materials; industry of building materials; industry of fireproof and thermal insulation materials; wood pulp and paper industry; pharmaceutical industry; food processing industry; production of alcoholic and non-alcoholic beverages; animal feed production; production of artificial fertilizers and agricultural chemicals; tobacco industry; textile industry; rubber industry. 

2. Design, construction, operation, and maintenance of process plants. Design of process plants; construction of process plants; commissioning; operation and maintenance of process plants; function and safety testing; automatic management and control systems; information technologies in design and management of process plants. 

3. Basic and ancillary operations, apparatus, and machines in process industry. Thermal (heating, evaporation, condensation, cooling, melting, etc.); diffusion (distillation, rectification, adsorption, absorption, crystallisation, extraction, drying, etc.); mechanical (grinding, milling, sieving, classification, briquetting, tableting, etc.); hydromechanical (sedimentation, filtration, centrifugation, dedusting, mixing, etc.); biochemical and chemical operations (fermentation, oxidation, reduction, etc.); ancillary operations and equipment (transport, storing, packaging, etc.); apparatus and machines, pipelines, and reinforcements. 

4. Energy in process industry. Energy efficiency in technological processes; use of renewable energy sources. 

5. Environmental engineering and sustainable development in process industry. Environmental protection, protection of work environment; circular economy in environmental protection; waste material management in process industry; solutions for reduction of GHG emissions from process industry. 

6. Processes and plants in water preparation and purification in process industry. Treatment of water for various applications in process industry; wastewater purification in process industry. 

7. Drying and dryers. Drying processes and equipment; conventional and new drying technologies; drying process control and management, energy efficiency, environmental impacts; dryers in food processing industry, dryers in non-metal industry, wood dryers, etc. 

8. Gas engineering. Fuel gases; technical and medical gases; production and application. 

9. Modelling and optimization of process plants and thermal power plants

10. Measurements and control in process industry. Base physical quantities and units in process industry; legislation and standardisation in the field of measuring and testing; measuring for the purpose of process control, operation, and automatic management; measurement systems (sensors, transducers, actuators; organisation of complex measuring systems with data acquisition. 

11. Quality management and standardisation in organisations. Quality management systems and related, standardised management systems – environment, food safety, occupational health and safety, information safety, risks, etc.; integration of an organisation’s system management; methods, techniques and tools in quality planning, management, improvement, and provision, and in related systems of an organisation’s management; standardisation, metrology, and quality control; accreditations, verifications, assessments, and certifications of management system of an organisation; quality culture and quality strategy in production and service rendering organisations. 

Round table

The round table will gather renowned professionals in this field from Serbia and the region, who will highlight the role, importance, and challenges of the circular economy in solving the problem of waste accumulation, preservation of natural resources, and responsible waste management in different fields of process industry. 

 

Circular economy is an economic system aimed at eliminating waste and the continual use of resources. Circular systems employ reuse, sharing, repair, refurbishment, remanufacturing and recycling to create a close-loop system, minimising the use of resource inputs and the creation of waste, pollution and carbon emissions. Round table themes are:
  • Circular economy in food industry
  • Circular economy as sustainable way of market value creation
  • Circular economy strategy of Republic of Serbia
  • Circular economy and ecology, law, economy, organization

Na okruglom stolu o cirkularnoj ekonomiji u prehrambenoj industriji treba da učestvuju donosioci odluka, rukovodioci, inženjeri, studenti i profesori mašinskih, tehnoloških, hemijskih, ekonomskih fakulteta, fakulteta organizacije, bezbednosti, predstavnici lokalnih samouprava.

 

Congress fee

The full congress fee is 8,000 dinars, while for SMEITS members the fee is 6,400 dinars (VAT included). The fee includes the congress material, welcome cocktail attendance, formal lunch attendance, etc. 

Information for authors

The Book of Abstracts of all accepted papers will be printed in Serbian and in English. The Proceedings including all full-length papers will receive CIP and ISBN. The original presented papers can receive DOI (digital object identifier), which provides higher visibility and citation benefits. A number of original papers presented at the congress will be proposed for publishing in the following journals: “FME Transactions“ – a scientific journal of the Faculty of Mechanical Engineering of Belgrade, which is on Web of Science (WoS), Emerging Sources Citation Index (ESCI) list, and the journal “Procesna tehnika“ (M53), with a possibility to receive DOI number. The paper application should be sent to the organiser to procesing@smeits.rs and it must include: 

  • The proposed topic and summary (abstract) in English and in Serbian;
  • The list of authors with affiliations in English and in Serbian, and contact details;
  • A summary (abstract) of maximum 1000 characters in English and in Serbian;
  • A short CV of the first author.

 

Authors can send applications and present their papers as follows: 

  • A presentation within the programme, a summary in the printed Book of Abstracts and a full-length paper in the Proceedings on the website of SMEITS publications,
  • Presentation on a poster (poster session) a summary in the printed Book of Abstracts and a full-length paper in the Proceedings on SMEITS website,
  • Presentation within the programme and a summary in the printed Book of Abstracts.

Dates and deadlines

  • The proposed topic of the paper and summary (abstract) should be sent to the organiser’s email address procesing@smeits.rs by 20th March 2020.
  • Authors will receive a notification on acceptance of their topic and the instruction for the preparation of the full-length paper by 31st March 2020.
  • The paper written on the accepted topic should be submitted to the Organizer for review by 1st May 2020.
  • Authors will receive a notification on acceptance of their paper or a need for a revision by 10th May 2020.
  • Presentations of papers should be submitted by 25th May 2020. 

Official languages

The official languages of Processing’20 are English and Serbian. Papers should be preferably submitted and presented in the English language. Simultaneous translation will not be provided. 

Student Programme

Students will present their papers within a special session and the author of the best paper will be awarded.

Call for sponsors

The Organizer invites all interested companies and organisations to be sponsors of Processing ’20 and to enter into sponsorship agreements as soon as possible in order to be entitled to the congress fee payment in monthly instalments. 

  • The sponsors have the following rights:
  • The sponsor’s name and logo will be printed in the appropriate, noticeable section in the final programme and congress invitation.
  • The sponsor’s name or logo (50x50 cm) will be displayed at the central place of the hall during the congress.
  • The sponsor’s name or logo as well as its one-page colour advertisement will be printed in the Book of Abstracts and in two issues of the journal “Procesna tehnika” in 2020.
  • At the exhibition within the congress, the sponsor will be entitled to use an arranged exhibition area free of charge.
  • Three professionals from the sponsor’s company or organization will be entitled to participation in the congress free of charge.
  • The sponsor will be entitled to give a 10 minute presentation of its business programme or new products to the congress attendees. The topic of that presentation will be included in the printed programme of the congress. the sponsor’s presentations will be posted at the event site.
  • The sponsor will be entitled to distribute prospectuses, catalogues, and other professional and information material to the congress attendees.

Accomodation


"Fruske Terme" hotel offered special discount for the Procesing '20 participants

Accomodation and excursions

"Rednek", tourst agency offered special accomodation and touristic tours for the Procesing '20 participants.

 

undefined

Generalni pokrovitelj  
50. Međunarodnog kongresa o KGH 


undefined


Pokrovitelj izložbe u okviru
50. Međunarodnog kongresa o KGH